Quick Prep Plus is suited for use on interior drywall and may be applied in spray or roller application. Quick Prep Plus prep coat is specifically formulated for use in lieu of skim coat of joint compound and to uniform porosities between gypsum board face paper and joint compound.
- Color: White Packaging: 5 US Gal. (18.9 L) pail
- Finish: Smooth Coverage: 200 – 300 square feet (18.6 – 27.9 square meters) per gallon for optimum hide on drywall. Coverage rates will vary with mil thickness, applicator technique and type of spray tip (amount of fallout).
- Shelf Life: Please see the "Technical Guide - Finishing Product Shelf Life" for details
- Storage: Store materials in a dry area. Protect materials from direct sunlight.Do not stack more than two pallets high. Store materials at a temperature between 40°F – 90°F (4°C – 33°C). Do not freeze, product will not recover.
For complete Technical Data, please see the Product Data and Submittal Sheet.
Mix by stirring. Thinning is optional. May be thinned with one pint of water per five gallons. Maintain minimum air temperature of 55°F (10°C) degrees during application until completely dry. Product should be applied to walls first to eliminate fallout on the sanding fuzz. While the wall is wet, spray the ceilings so the fallout will soak into wet material. Apply with airless sprayer with minimum pump capacity of one gallon per minute. Suggested tip size range: 0.023 to 0.031. May also apply with 1/4", 3/8" to 1/2" nap roller. Sanding is optional. Easily sands with 180 to 220 screen or film back to achieve plaster like finish.
Do not allow product to freeze. Product will not recover.
Since methods and condition of application such as temperature, humidity and over thinning are beyond our control, CertainTeed Gypsum, Inc. (CertainTeed) will not be responsible for the failure of this product when not used according to directions and specifications and accepted standards of procedure inherent in drywall application; or when reasonable allowance is not made by the user for adverse weather and job conditions. However, if this product proves to be defective, maximum liability shall be limited to replacement of the material only or refund of the purchase price. This shall be the full limit whatsoever of CertainTeed's liability. All claims shall be submitted in writing to CertainTeed within thirty days from the date of discovery. State/Provincial or Federal laws may provide rights in addition to this warranty that cannot be modified or excluded.
CertainTeed Gypsum is committed to sustainability. Our manufacturing facilities, located throughout North America, provide regional material coverage and operate with a responsible and environmentally conscious ethic that includes reclamation, preservation of natural resources, recycling and waste management. We are continually looking for ways to reduce our impact on the environment while meeting customer demand for sustainable products that deliver comfort, protection and performance.
For more information, please see our Sustainability Brochure.