Extreme Texture Coat is an acrylic based, ready mix, non-aggregate spray coating. It provides a durable scratch and abuse resistant coating for interior walls and ceilings. You can scrub it clean without damaging its surface, yet it's non-abrasive to the skin. Extreme Texture Coat creates a durable and mold resistant surface for orange peel and knockdown textures.
- Color: White
- Finish: Flat
- Packaging: 5 US Gal. (18.9 L) Pail
- Coverage: Approximately 150 square feet per gallon for medium orange peel or knockdown texture applied at 10 wet mils.
- Shelf Life: Please see the "Technical Guide - Finishing Product Shelf Life" for details
- Storage: Store materials in a dry area. Protect materials from direct sunlight. Store materials at a temperature between 40°F – 90°F (4°C – 33°C). Do not allow product to freeze as the product will not recover.
For complete technical data, please see the Product Data and Submittal Sheet.
Apply Extreme Texture Coat with portable texture sprayer, spray rig or hand-held hopper. Spray as you would any orange peel or knockdown texture. Prime with CertainTeed Level V M2Tech and finish with topcoat of paint. Product is bucket ready. Clean tools, equipment and skin with soapy water and rinse.
For complete installation instructions, please refer to the Product Data Sheet.
Since methods and condition of application such as temperature, humidity and over thinning are beyond our control, CertainTeed Gypsum, Inc. (CertainTeed) will not be responsible for the failure of this product when not used according to directions and specifications and accepted standards of procedure inherent in drywall application; or when reasonable allowance is not made by the user for adverse weather and job conditions. However, if this product proves to be defective, maximum liability shall be limited to replacement of the material only or refund of the purchase price. This shall be the full limit whatsoever of CertainTeed's liability. All claims shall be submitted in writing to CertainTeed within thirty days from the date of discovery. State or federal laws may provide rights in addition to this warranty that cannot be modified or excluded.
CertainTeed Gypsum is committed to sustainability. Our manufacturing facilities, located throughout North America, provide regional material coverage and operate with a responsible and environmentally conscious ethic that includes reclamation, preservation of natural resources, recycling and waste management. We are continually looking for ways to reduce our impact on the environment while meeting customer demand for sustainable products that deliver comfort, protection and performance.
For more information, please see our Sustainability Brochure.