Flintlastic® FR-P CoolStar™

CertainTeed Flintlastic FR-P CoolStar is designed for us as a roofing membrane cap sheet in SBS modified bitumen roof system assemblies over various types of substrates for both new construction and reroofing installations. It is suitable for most low slope roofing applications and may be used for roof system flashings including wall treatments, base flashings and field flashings. Flintlastic FR-P CoolStar meets the requirements established by California Title 24 and ENERGY STAR®.  Visit www.coolroofs.org or www.energystar.gov for more information.

Easy to Install...the CoolStar coating is factory applied by CertainTeed, so there is no need for post-installation, on-site coating. Installing a CoolStar-coated roof surface product is a one-step process, and touch-up can occur immediately after.

This roofing product qualifies for an energy tax credit of up to $500 under the Tax Relief, Unemployment Insurance Reauthorization and Job Creation Act of 2010.  For more information, visit the CertainTeed Energy Tax Credit page.

CertainTeed Flintlastic FR-P CoolStar is produced with a high performance, non-woven polyester mat and a superior grade fire-retardant modified bitumen compound.

• Support Mat: A high performance, puncture and tear resistant, non-woven polyester mat
• Top Surface: Mineral granules and flexible acrylic-based CoolStar coating
• Back Surface: Light sand finish, release agent
• Weight: 106 lbs. per roll
• Dimensions: 39-3/8" x 32' 10" (100 sq. ft.)
• Thickness: 4.2mm (168 mils)
• Coverage: One square

For additional technical resources please refer to the CertainTeed Commercial Roof Systems Manual or click on the Technical Information link located on the left navigation area.

CertainTeed Flintlastic FR-P CoolStar is intended for hot asphalt application or approved cold process adhesives such as CertainTeed FlintBond™. Rolls should be stored upright, off ground, completely protected from the weather. Roof decks shall be structurally sound, dry, smooth and meet or exceed minimum requirements of the deck manufacturer, local code and CertainTeed.

For detailed installation instructions please refer to the CertainTeed Commercial Roof Systems Manual or click on the Installation Instructions link located on the left navigation area.

CoolStar-coated roofing products are more energy-efficient than standard roofing products and exceed ENERGY STAR® standards.

To meet ENERGY STAR standards, a low slope roofing surface must have a solar reflectivity of .65 (meaning it reflects 65% of the radiation away from the surface and absorbs 35%).

In general, an ENERGY STAR-labeled product can help reduce energy costs by as much as 30%.

The state of California has an even tougher requirement for a "cool" or energy-saving roof called Title24.  To comply, a low slope roofing surface must have an initial solar reflectivity of .70 and thermal emittance of .75.  CoolStar-coated roofing products surpass both of these important, industry-recognized standards.

All CoolStar cap sheets have initial ratings for solar reflectance and thermal emittance from the Cool Roof Rating Council (CRRC).