SHARE

Flintlastic® White Diamond GTA CoolStar™


 

view larger image

Flintlastic® White Diamond GTA CoolStar™

CertainTeed Flintlastic White Diamond GTA CoolStar is designed for use as a roofing membrane over various types of substrates for both new construction and reroofing installations. It is suitable for most low sloped roof decks and may be used for roof system flashings including wall treatments, base and field flashings. Flintlastic White Diamond GTA CoolStar meets the requirements established by California Title 24 and ENERGY STAR®.

Easy to Install...the CoolStar coating is factory applied by CertainTeed, so there is no need for post-installation, on-site coating. Installing a CoolStar-coated roof surface product is a one-step process, and touch-up can occur immediately after.

This roofing product qualifies for an energy tax credit of up to $500 under the Tax Relief, Unemployment Insurance Reauthorization and Job Creation Act of 2010.  For more information, visit the CertainTeed Energy Tax Credit page.
 
*available by special order 


Energy Star® Rated Products Brochure


Commercial Roof Systems Selection Guide


CoolStar Brochure

CertainTeed Flintlastic White Diamond GTA CoolStar is produced with a high performance, non-woven polyester mat and a superior grade, modified bitumen compound and surfaced with a flexible, acrylic-based CoolStar coating.

  • Support Mat: High performance, puncture and tear resistant, non-woven polyester mat
  • Top Surface: Mineral granules and flexible, acrylic-based CoolStar coating
  • Back Surface: Torchable Polyethylene Film
  • Weight: 100 lbs. per roll
  • Dimensions: 39-3/8" x 32' 10" (100 sq. ft.)
  • Thickness: 4.0mm (160 mils)
  • Coverage: One square


For additional technical resources please refer to the CertainTeed Commercial Roof Systems Manual or click on the Technical Information link located on the left navigation area.

Commercial Roof Systems Selection Guide

Data Sheet - Flintlastic White Diamond GTA CoolStar

MSDS - Flintlastic White Diamond GTA CoolStar

CertainTeed Flintlastic White Diamond GTA CoolStar is intended for torch application only and should not be exposed to adhesives or solvent based materials. Rolls should be stored upright, off ground, completely protected from the weather. Roof decks shall be structurally sound, dry, smooth and meet or exceed minimum requirements of the deck manufacturer, local code and CertainTeed.

For detailed installation instructions please refer to the CertainTeed Commercial Roof Systems Manual or click on the Installation Instructions link located on the left navigation area.
Flintlastic Modified Bitumen Application Manual

Outstanding Warranty Options

CertainTeed backs its commercial roofing systems with the confidence of four warranty choices:

Limited Product Warranty
NDL Roof Membrane Limited Warranty*
Full System NDL Limited Warranty*
Integrity Coverage Warranty*

Owners and specifiers who choose the NDL or Integrity Coverage warranty options have the added security of manufacturer involvement in the sometimes difficult process of contractor qualifying and workmanship inspection. Consult with the roofing contractor and your CertainTeed commercial roofing territory manager to decide which CertainTeed warranty is best for your building or project.

*NDL and Integrity Coverage (IC) warranties are not available on all specifications and are only available through CertainTeed Gold and Silver Star Contractors. (IC is only available through CertainTeed Gold Star Contractors.)

Low-Slope Full System NDL Warranty

Low-Slope Integrity Coverage Program Handbook

Low-Slope Limited Product Warranty

Low-Slope NDL Roof Membrane Limited Warranty

Low-Slope Integrity Coverage Warranty

CoolStar-coated roofing products are more energy-efficient than standard roofing products and exceed ENERGY STAR standards.


To meet ENERGY STAR standards, a low slope roofing surface must have a solar reflectivity of .65 (meaning it reflects 65% of the radiation away from the surface and absorbs 35%).


In general, an ENERGY STAR-labeled product can help reduce energy costs by as much as 30%.


The state of California has an even tougher requirement for a "cool" or energy-saving roof called Title24.  To comply, a low slope roofing surface must have an initial solar reflectivity of .70 and thermal emittance of .75.  CoolStar-coated roofing products surpass both of these important, industry-recognized standards.


All CoolStar cap sheets have initial ratings for solar reflectance and thermal emittance from the Cool Roof Rating Council (CRRC). 



CoolStar Brochure

California Title 24 White Paper

Roofing Green Brochure

Roofing is Building Responsibly

 
  
Search CertainTeed.com
| Entire Site |