SHARE

FlintCoat™ -W




case studies

FlintCoat™ -W

CertainTeed FlintCoat -W is a co-polymer elastomeric emulsion exterior protective coating that provides excellent protection, appearance, mildew resistance, color stability, weatherability and flexibility. FlintCoat-W is an ENERGY STAR® labeled roof coating.

  • FlintCoat -W applies easily by brush, roller or spray
  • Cures within 24-48 hours
  • Dries to a tough, flexible elastic film
  • Excellent adhesion over clean primed surfaces
  • Outstanding U.V. protection; reflects minimum 90% of the sun's rays
  • Excellent weather resistance
  • Good resistance to salts and alkalis
  • Aluminum reflectant characteristics

The following information represents typical average properties of FlintCoat -W:

  • Weight: 11 lbs. per gallon
  • Packaging: 5-gallon pail
  • Coverage: Approx 1/2 to 1 gallon per 100 square feet (two coats are required)
  • Color: White


For additional technical resources please refer to the CertainTeed Commercial Roof Systems Manual or click on the Technical Information link located on the left navigation area.
CertainTeed FlintCoat -W can be applied by brush, roller, or spray. Mix thoroughly with a mechanical mixer prior to application of the coating. FlintCoat -W should be applied in two coats at the rate of 1 to 1-1/2 gallons per 100 sq. ft. per application. The coverage rate will vary depending upon the surface to be coated.

For detailed installation instructions please refer to the CertainTeed Commercial Roof Systems Manual or click on the Installation Instructions link located on the left navigation area.