FlintCoat™ -A NF

CertainTeed FlintCoat-A NF is a non-fibered aluminum roof coating and when applied to the roof the aluminum flakes leaf in overlapping parallel layers, forming a reflective, metallic shield over the base material. The combination of these two protective materials, aluminum and asphalt, results in a self-protecting roof coating with long-lasting moisture and heat-resistant properties.

• Self-protecting--the aluminum shield protects the base coating's asphaltic oils
Reflects over 60% of the sun's rays
Prolongs roof life--helps protect roof membrane from UV degradation
Helps reduce energy consumption costs in hot weather
Easy to apply

The following information represents typical average properties of FlintCoat-A NF:

• Weight: 8.4 lbs. per gallon
Packaging: 5-gallon pail
Coverage: Built-up (roll roofing) – 1 to 1-1/4 gallons per 100 square feet
Smooth surface and metal roofing – 3/4 gallon per 100 square feet
Color: Silver

For additional technical resources please refer to the CertainTeed Commercial Roof Systems Manual or click on the Technical Information link located on the left navigation area.

CertainTeed FlintCoat-A NF Non-Fibered Aluminum Roof Coating should be spread uniformly over the roof surface. Care should be taken not to overwork the coating while applying as this will have a damaging effect on the leafing action of the aluminum. Be sure to mechanically mix the aluminum coating thoroughly before using. FlintCoat-A NF can be applied with a soft roof brush, roller or spray.

For detailed installation instructions please refer to the CertainTeed Commercial Roof Systems Manual or click on the Installation Instructions link located on the left navigation area.