WinterGuard™ waterproofing shingle underlayment is the solution for winning the battle against water penetration in your roof's most vulnerable places. WinterGuard is a composite material of asphalt polymers, formed into a rolled sheet. The asphalt makes it vapor-tight, and the polymers make the asphalt elastic and sticky. This protective barrier is able to stretch and seal around nails driven through it. Placing WinterGuard a minimum of 24" past the interior wall line at the eave provides your first line of defense.

WinterGuard is one of the key components in the CertainTeed Integrity Roof System™ which is comprised of underlayments, shingles, accessory products and ventilation all working together. The Integrity Roof System is designed to provide optimum performance--no matter how bad the weather conditions are. For more information regarding the Integrity Roof System click on the brochure link to the right.

Choose your Weapon - WinterGuard comes in three effective surface finishes: Sand, Granular and Hi Tack/High Temperature Film. Consider the design and slope of the roof, combined with your personal preference.

SAND

• Embedded sand to enhance traction during application
• Improved exposure prior to shingling over
• Very effective under tile
• Meets ASTM D1970
• Length: 65 ft. (short roll 32.5 ft.) Width: 3 ft.
• 68 lbs. per roll (short roll 35.5 lbs. per roll)

GRANULAR

• Embedded granules for superior traction during application
• Improved exposure prior to shingling over
• Very effective under tile
• Meets ASTM D1970
• Length: 65 ft. Width: 3 ft.
• 68 lbs. per roll

HIGH TACK / HIGH TEMPERATURE

• Enhanced skid-resistant top film surface
• An advanced waterproofing underlayment for shingle, metal, slate and tile roofs
• Specially formulated to resist high roof temperatures under metal roofs
• Meets ASTM D1970
• Length: 65 ft. Width: 3 ft.
• 50 lbs. per roll

Easy Installation

WinterGuard's adhesive bottom surface is protected with a disposable silicone coated release film, which is split down the middle for simple and cost-effective application. The "Peal & Flop" method is especially effective in valleys and other difficult places using manageable lengths. Even more important, WinterGuard can be repositioned before deck adhesion occurs. For additional installation instructions, refer to the Underlayment Installation Instructions.

WinterGuard is warranted against manufacturing defects and to remain watertight for the same period as the warranty duration carried by the shingles applied above it -- up to a maximum of 50 years.