Spray-applied

view larger image
Prevents mold growth

view larger image
Also Consider:

Rebates and Savings


Please enter a valid US zip code

view larger image

Unmatched Mold Prevention

Through cutting-edge proprietary coating technology, FortiCel™ provides a finished surface on all building components that will prevent mold growth on its coating surface. This coating is virtually permanent and is backed by full 25-year warranty protection. FortiCel™ helps prevent mold growth that may cause unnecessary damage to the structural framing of your house or threaten your family’s health. Apply FortiCel™ to protect your home and family against mold.
 
These insulation products may qualify for energy tax credits. For more information, visit the CertainTeed Energy Tax Credit page, or certainteed.com/itools for your area's specific rebates and incentives.

CertainTeed cares about the environment and Building Responsibly™, and for more than 100 years has maintained a commitment to provide sustainable, innovative solutions that improve energy efficiency and comfort. From production to product, CertainTeed's focus has been on minimizing its impact on the environment by reducing energy consumption, conserving renewable resources and lowering greenhouse gas emissions. And with our Sustainable Insulation® fiber glass products, the mission continues. Visit www.sustainableinsulation.com for more information or watch our YouTube video.


FortiCel Brochure


FortiCel Crawlspace Sell Sheet

FortiCel Jobsite Post Placard

FortiCel Builders Sell Sheet

Homebuyers Sell Sheet

Mold Pretreatment Brochure

FortiCel Mold Prevention Video

Mold Protect Surface Treatments

  1. Surface treatments shall be inorganic silica cross-link cured film structures.
    • V.O.C. must be "0"
  2. Coating shall have independent laboratory evidence of passing ASTM 5590 and must prevent spore germination.
  3. Coating shall have independent laboratory evidence of prevention of germination as tested by MouldWorks Laboratory, Portland, OR according to MouldWorks Test Panel for testing of inherent mold resistance of coatings and their ability to prevent spore germination.
  4. Laboratory testing must include evidence of independent evaluation of coating capability to prevent germination of each of the following species and results (see chart on Specification Sheet).
  5. Surface treatments shall have passed ASTM D-3273-94 testing, with a zero mold growth (10) rating, and must be performed by a credible third party national laboratory.
  6. Treatment must be warranted for 25 years and must include a manufacturer-backed 25-year full remediation warranty on all treated areas.
    • Warranty must be serialized and traced to the property address of application and must be enforceable without regard to ownership.

Forticel Longevity Report

FortiCel ASTM Report

FortiCel Mold Evaluation

FortiCel Spec Sheet

FortiCel CrawlSpace Specification Sheet

FortiCel Technical Bulletin

Forticel MSDS

FortiCel™ is applied by certified technicians through a spray-on application that is not disruptive to the construction process. Once the building is dried-in, the FortiCel™ coating is applied to all chosen surfaces. Other tradesmen may continue working while the product is being applied but it is important to perform the application prior to installation of insulation. FortiCel™ will dry in 20 minutes to an hour and will not wash off or degrade.


Refer to the FortiCel Crawlspace 25-year warranty.
FortiCel Crawlspace Warranty

 
Search CertainTeed.com
| Entire Site |