HT Blanket (High Temperature Blanket)




Flexible and resilient thermal insulation

Rebates and Savings


Enter your zip/postal code to view rebates and savings
(US and Canada only)

view larger image
Basic Uses

HT Types 1 and 2 are designed for use on industrial equipment operating at temperatures up to 1000°F (538°C). Type 1 can be used on panel systems, as a flexible wrap or on industrial ovens. Type 2 can be used for metal mesh blankets and on boilers, vessels and other industrial equipment operating at temperatures up to 1000°F (538°C).

Product Description

High Temperature Blanket is composed of rotary glass fibres bonded together using a thermosetting resin and formed into plan, flexible and resilient insulation.

Features and Benefits
• Can be used on industrial equipment operating at temperatures
up to 1000°F (538°C).
• May be applied directly to any hot surface.
• Type 1 can be used on panel systems as a flexible wrap, or on industrial ovens.
• Type 2 can be used for metal mesh blankets, on boilers, vessels and other industrial equipment operating at temperatures up to 1000°F (538°C).
• Type 1 is available in batt or roll form.
• Type 2 is available in batt form only.
• Easy to handle, cut with a knife and install.
• Contains over 60% recycled glass content.

These insulation products may qualify for energy tax credits. For more information, visit the CertainTeed Energy Tax Credit page, or certainteed.com/itools for your area's specific rebates and incentives.

CertainTeed cares about the environment and Building Responsibly™, and for more than 100 years has maintained a commitment to provide sustainable, innovative solutions that improve energy efficiency and comfort. From production to product, CertainTeed's focus has been on minimizing its impact on the environment by reducing energy consumption, conserving renewable resources and lowering greenhouse gas emissions. And with our Sustainable Insulation® fiber glass products, the mission continues. Visit www.sustainableinsulation.com for more information or watch our YouTube video.

Bacterial and fungi resistance:
-ASTM C1338-96
-Does not breed or promote


Odor emission:
-ASTM C1304
-Pass test

Smoulder resistance:
-ULC-S129
-Mean mass loss 5% and each specimen ≤ 10%

Surface burning characteristics:
-ASTM E84/UL 723
-CAN/ULC-S102-M88
-Flame spread index: 25 max
-Smoke developed index: 50 max

Hot surface performance:
-ASTM C411
-Pass test at 1000ºF (538ºC), 8" stack

Density:
-Type 1: 1.25lb/ft3 (nominal) 20kg/m3
-Type 2: 2.5lb/ft3 (nominal) 40kg/m3

Thermal conductivity:

-ASTM C177
-Avg. K at 75ºF mean BTU · in/(hr · ft2 · ºF)

HT blanket insulations,  both Type 1 and Type 2, may be applied directly to any hot surface. This is normally accomplished by securing through the use of welded studs and nuts or pins and speed washers and then providing a final covering of sheet metal, expanded metal, metal mesh, or cemtentitous mastics. If pins and speed washers are incorporated, you must ensure that the insulation is not compressed under the washer.


CertainTeed has no control over the installation design, installation workmanship, acessory materials, or conditions of application, CertainTeed does not warrant the performance or results of any installation containing its products.
CertainTeed insulation products improve building energy efficiency and reduce building energy consumption for the life of the structure. As a result, they help conserve nonrenewable energy sources, decrease dependence on foreign oil and lower greenhouse gas emissions. In addition, the recycled content of CertainTeed fiber glass insulation is currently 30-35% and exceeds the EPA Recovered Material Guideline for fiber glass products, consisting of pre-consumer and post-consumer glass cullet.

Most CertainTeed fiber glass insulation products have been certified by the GREENGUARD Environmental Institute and meet the GREENGUARD standards for low Volatile Organic Compound (VOC) emissions, including formaldehyde.

 
Search CertainTeed.com
| Entire Site |