SHARE


No stapling

view larger image
Quick Install

view larger image

Also Consider:
view larger image

Speedy Installation

DESCRIPTION
This product is intended for use in either residential or commercial construction as thermal insulation in walls. These batts are designed for use in standard width wood framed construction where a vapor retarder is needed. The batts have a kraft facing without flanges and can be friction-fit between wall studs for non-exposed applications.

BENEFITS
Installing this product will save time and improve productivity by reducing field labor. Stapling is not required because the fiber glass fills the entire cavity. In addition to its thermal properties, this product also provides excellent acoustical performance.

This insulation product qualifies for an energy tax credit of up to $1500 under the American Recovery and Reinvestment Act. For more information, visit the CertainTeed Energy Tax Credit page.
 
 


SpeedyR™ Flyer


Choose the Right Insulation


Fiber Glass Insulation Guide


Residential Insulation Overview


Lumber Dealer Overview


Insulation and Fire Safety

CertainTeed building insulation complies with ASTM C 665 and other specifications as listed on corresponding product specifications.

Download Product Specifications, Submittal Forms and MSDS here.
SpeedyR™ Tabless Batts Specification Sheet

Submittal Form

MSDS

Material Safety Data Sheet (MSDS) - Spanish

SpeedyR Tabless Batts friction-fit between wood studs and do not require stapling.

For most areas, vapor retarders should be installed on the warmin-the-winter side of the insulation (toward the interior). A vapor retarder is any material that limits or restricts the transmission of water vapor.

Common vapor retarders include kraft or foil facings adhered directly to fiber glass insulation and nylon or polyethylene films applied over insulation filled building cavities.
For some warm and humid areas, vapor retarders—if used—should be installed outside the heating or building envelope. It is not appropriate to install kraft faced fiber glass with the facing toward the exterior. Check local practice and/or building codes before installation.
Recommendations for Installation in Residential and Other Light-Frame Construction

Recommendations for Installation in Residential and Other Light-Frame Construction - Spanish

NAIMA Installation Videos

How to Insulate

Refer to CertainTeed’s Lifetime Limited Insulation Warranty for Fiber Glass Building Insulation.
Building Insulation Warranty

CertainTeed insulation products improve building energy efficiency and reduce building energy consumption for the life of the structure. As a result, they help conserve nonrenewable energy sources, decrease dependence on foreign oil and lower greenhouse gas emissions. In addition, the recycled content of CertainTeed fiber glass insulation meets the EPA Recovered Material Guideline for fiber glass products, 20-25% consisting of pre-consumer and post-consumer glass cullet.

Most CertainTeed fiber glass insulation products have been certified by the GREENGUARD Environmental Institute and meets the GREENGUARD standards for low Volatile Organic Compound (VOC) emissions, including formaldehyde.
NAHB Green Certification - Batt, Roll & Blowing Insulation

CertainTeed Insulation Green Information

LEED® 2.2 NC - New Construction Credit Opportunities for Fiber Glass

LEED® for Homes Rating System Credit Opportunities for Fiber Glass

LEED Fact Sheet

Formaldehyde Fact Sheet

GREENGUARD Brochure