CertaPro™ Commercial
Partition Batts

DESCRIPTION

• Unfaced, light-density fiber glass batts 11/2" (38mm) thick, for use in steel stud construction. Sized for friction-fit installation.

USES

• To enhance acoustical and thermal performance in shaft and low-profile partition walls.

PRODUCT BENEFITS

• Enhances acoustical and thermal performance properties.
• Will not rot or mildew; resists fungal growth.
• Lightweight; easily fabricated and installed.
• Rated noncombustible per ASTM E 136.

COMPLIANCES

• ASTM C 553, Types I, II
• ASTM C 665, Type I
• ICC Model Building Codes
• California Quality Standards, Reg. No. CA-T024 (PA)

CertaPro Partition Batts are designed to fill the entire stud cavity and be held in place by friction-fit until the interior finish is applied. For applications where the wall is not finished on both sides or the insulation does not fill the cavity, supplementary support of the insulation, such as wire or insulation pins, shall be provided to hold the insulation in place.

These installation recommendations are general in nature. Other methods are acceptable. Please consult local building codes for recommendations best suited to the application.

Please refer to CertaPro™ Commercial Limited One-Year Fiber Glass Insulation Warranty.
In as much as CertainTeed has no control over the installation design, installation workmanship, accessory materials, or conditions of application, CertainTeed does not warrant the performance or results of any installation containing its products.

CertainTeed insulation products improve building energy efficiency and reduce building energy consumption for the life of the structure. As a result, they help conserve nonrenewable energy sources, decrease dependence on foreign oil and lower greenhouse gas emissions. In addition, the recycled content of CertainTeed fiber glass insulation meets the EPA Recovered Material Guideline for fiber glass products, 20-25% consisting of pre-consumer and post-consumer glass cullet.

Most CertainTeed fiber glass insulation products have been certified by the GREENGUARD Environmental Institute and meet the GREENGUARD standards for low Volatile Organic Compound (VOC) emissions, including formaldehyde.