English
Español
Français
Keep Me Informed
Contact Us
BUILDING PRODUCTS
Idea Center
Learning Center
Sustainable Building
Design & Building Professionals
Gypsum
Wall & Ceiling Boards
Glass Mat Gypsum Boards
Decorative Mouldings
Textures, Plasters & Coatings
Level 5 Coatings
Wall & Ceiling Textures
Finishing Plasters
Joint Finishing Compounds
Joint Reinforcement
Product Index
Photo Gallery
Technical Information
Installation Instructions
Warranties
Literature & Brochures
Green Information
Use the Gypsum Product Finder to narrow your results.
TYPE OF PRODUCT
close
Gypsum
Reset
close
ProRoc® Coarse-Tex 15 kg bag
Overview
Technical Information
Installation
Warranty
ProRoc® Coarse-Tex 15 kg bag
ProRoc® Wall and Ceiling Spray Textures provide a decorative appearance over gypsum panels and most other interior wall and ceiling surfaces. They are formulated to provide for a variety of decorative options including splatter, knockdown and orange peel designs.
For complete product description please see Product Data and Submittal Sheet
Wall and Ceiling Spray Textures Product Data and Submittal
MATERIAL
: Powder or Ready-Mixed
COLOUR:
Off white
COVERAGE
: The coverage of ProRoc® Wall and Ceiling Textures varies greatly depending on formula base, type of pattern.
For complete Technical Data, please see Product Data and Submittal Sheet.
Wall and Ceiling Spray Textures Product Data and Submittal
Powered Aggregate MSDS
SITE CONDITIONS:
The room temperature and wallboard should be maintained at 13°C (55°F) for 48 hours prior to application and continuously thereafter until completely dry. Continuous ventilation must be provided to ensure proper drying. When using temporary heating, care should be taken to avoid overheating and high humidity conditions.
SURFACE PREPARATION:
Ensure that surfaces to be decorated are thoroughly dry and free of dirt, oils, mildew and other contaminants.
PRIMING:
All surfaces to be textured should be primed with texture primer prior to application to ensure uniform porosity and texture. Primer should be dry prior to applying texture. Adhere to all manufacturers’ specific directions for painting and decorating materials.
For complete installation instructions, please see Product Data and Submittal Sheet
Wall and Ceiling Spray Textures Product Data and Submittal
Since methods and condition of application such as temperature, humidity and over thinning are beyond our control, CertainTeed Gypsum, Inc. (CertainTeed) will not be responsible for the failure of this product when not used according to directions and specifications and accepted standards of procedure inherent in drywall application; or when reasonable allowance is not made by the user for adverse weather and job conditions. However, if this product proves to be defective, maximum liability shall be limited to replacement of the material only or refund of the purchase price. This shall be the full limit whatsoever of CertainTeed’s liability. All claims shall be submitted in writing to CertainTeed within thirty days from the date of discovery. State or federal laws may provide rights in addition to this warranty that cannot be modified or excluded.
close
Add to My Project Folder
Select:
or
Create New Project:
Title of Project
This product has been added.
go
Exterior
Roofing
Siding
Trim
Sheathing
Fence/Railing/Deck
Foundations
Windows
Interior
Insulation
Gypsum
Ceilings
BackerBoard/Underlayment
Infrastructure
Pipe
LEED for Commercial
LEED for Residential
NAHB Green Standards
Awards & Certifications
Literature & News
Sustainability Courses
FAQs
Visualize Your Home
Photo Gallery
Case Studies
What's New
Building Science
Roofing
Fiber Cement Siding
Vinyl Siding & Polymer Shakes
Trim
Sheathing
Fence/Railing/Deck
Foundations
Insulation
Gypsum
Ceilings
BackerBoard/Underlayment
Pipe
Architects/Designers
Builders
Contractors
Distributors
Engineers