No-Coat® ULTRATRIM™ L Trim Drywall Corners



 

No-Coat® ULTRATRIM™ L Trim 1/2” Drywall Corners

The No-Coat® Structural Laminate (SLAM™) design is a revolutionary drywall corner system that delivers superior strength and durability and eliminates costly callbacks. Whether finishing off angles, archways, inside or outside corners, No-Coat® offers a complete corner system that guarantees perfect results – every time.


No-Coat® ULTRATRIM™ L Trim is the ideal solution for suspended ceilings and window returns.

 
L Trim 1/2” 10’ x 50 – 161075

 



No-Coat® Drywall Corner Brochure

Please see No-Coat® Data and Submittal Sheet for complete Technical Data

No-Coat® MSDS

No-Coat® ULTRATRIM™ L Trim Data and Submittal Sheet

No-Coat® INSTALLATION INSTRUCTIONS

1. Apply a generous amount of approved joint compound to a clean, dry surface of drywall. 
2. Place the No-Coat® corner onto wet joint compound and press on firmly. 
3. Using a stiff 4 inch to 6 inch taping knife or an appropriate No-Coat® roller, wipe very hard, squishing the excess mud out from behind the No-Coat® corner trim and embedding the mud into both the paper fibers of the drywall board and the joint tape paper surface of the No-Coat® corner.
 
No-Coat® has a number of installation rollers available to help insure proper embedding, depending on the product used.
The process described above is the most important part of drywall corner trim installation and must be followed correctly for the warranty to apply.

 TIPS
• When storing ULTRATRIM™ corners, lay boxes flat on the floor. Leaning boxes against a wall may eventually cause the corners to warp.

 

 


Please see the attached document for complete Warranty details


No-Coat® Warranty

 
Search CertainTeed.com
| Entire Site |