ProRoc® High Density Setting Compound 15 kg Bags             

Color: Off-White
Packaging: 15 kg (33 lbs) bags, 2 kg (4.4 lbs) pails
Coverage: Approximate coverage is 32 kg (70 lbs) of powder per 93 m2 (1000 ft2) of drywall panel.
Storage: Rotate stock to avoid aging problems. Use within 60 days of delivery. Store in a dry location. Keep away from moisture. Opened bags should be closed tightly before storage.
Shelf Life: 6 months from production code date when stored properly.

For complete Technical Data please see Product Data and Submittal Sheet

Joint Finishing

Wallboard joints are normally finished using three coats of compound; the first to prefill the joint and embed the tape; the second to cover the tape, and the third to finish the joint. ProRoc® Setting-Type Compounds can be used for embedment and first coat. The third coat is typically done using ProRoc® Ready-Mixed Drywall All-Purpose Compound. For joint reinforcement the use of mesh tape is recommended. Apply the first coat to the joint in a band about 64 mm (2-1/2") wide. Centre ProRoc® Tape over joint and embed with a broad knife. Allow to set, as per product specifications on the package.

 

 

Since methods and condition of application such as temperature, humidity and over thinning are beyond our control, CertainTeed Gypsum, Inc. (CertainTeed) will not be responsible for the failure of this product when not used according to directions and specifications and accepted standards of procedure inherent in drywall application; or when reasonable allowance is not made by the user for adverse weather and job conditions. However, if this product proves to be defective, maximum liability shall be limited to replacement of the material only or refund of the purchase price. This shall be the full limit whatsoever of CertainTeed’s liability. All claims shall be submitted in writing to CertainTeed within thirty days from the date of discovery. State or federal laws may provide rights in addition to this warranty that cannot be modified or excluded.