SHARE

Easi-Fil™ Light Repair 20 & 90 1.25 kg pail



 

Easi-Fil™ Light Repair Setting Compound

Easi-Fil™ Brand Setting Compounds are chemically setting powders used to prefill joints, embed mesh joint tape and conceal joints, fasteners and trim accessories on gypsum wallboard. Light Repair compounds can be used for interior patching and repair. They are ideal for touch ups and final coats because they are specially formulated to be sandable once they are dry. Light Repair products are available in 20 and 90 minute setting times.

 
Easi-Fil Light Repair 20 1.25 kg pail – 309077

Easi-Fil Light Repair 90 1.25 kg pail – 309080

 

 


Colour: Off-White

Packaging: 1.25 kg (2.75 lbs) pails

Coverage: Approximate coverage is 25 kg (55 lbs) of powder per 93 m2 (1000ft2) of drywall panel.

Storage: Rotate stock to avoid aging problems. Use within 120 days of delivery.

Store in a dry location. Keep away from moisture.

Shelf life: 6 months from production code date when stored properly.

 

For complete Technical Information, please see Product Data and Submittal Sheet.

 

 


Joint Finishing

Wallboard joints are normally finished using three coats of compound; the first to prefill the joint and embed the tape; the second to cover the tape, and the third to finish the joint. ProRoc® Setting-Type Compounds can be used for embedment and first coat. The third coat is typically done using ProRoc® Ready-Mixed Drywall All-Purpose Compound. For joint reinforcement the use of mesh tape is recommended. Apply the first coat to the joint in a band about 64 mm (2-1/2") wide. Centre ProRoc® Tape over joint and embed with a broad knife. Allow to set, as per product specifications on the package.

 

 


Since methods and condition of application such as temperature, humidity and over thinning are beyond our control, CertainTeed Gypsum, Inc. (CertainTeed) will not be responsible for the failure of this product when not used according to directions and specifications and accepted standards of procedure inherent in drywall application; or when reasonable allowance is not made by the user for adverse weather and job conditions. However, if this product proves to be defective, maximum liability shall be limited to replacement of the material only or refund of the purchase price. This shall be the full limit whatsoever of CertainTeed’s liability. All claims shall be submitted in writing to CertainTeed within thirty days from the date of discovery. State or federal laws may provide rights in addition to this warranty that cannot be modified or excluded.
 
 
Search CertainTeed.com
| Entire Site |