Flintlastic® SA Mid Ply




 

Flintlastic® SA Mid Ply

CertainTeed Flintlastic SA Mid Ply is designed for use as a mid ply in multi-ply self-adhered systems.  It is suitable for use in the construction of various roof membrane assemblies over a variety of substrates.  It is intended for use over Flintlastic SA NailBase, Flintlastic SA PlyBase or directly self-adhered to suitable substrates.

  • Top Surface:  Permanent film
  • Back Surface:  Removable release film
  • Weight:  62 lbs. per roll
  • Dimensions:  39-3/8" x 32' 1" (100 sq. ft.)
  • Coverage:  One Square
  • Thickness:  3.0mm (110 mils)
 
For additional technical resources please refer to the CertainTeed Commercial Roof Systems Manual or click on the links located on the right.

When installing CertainTeed Flintlastic SA Mid Ply or any of the CertainTeed Flintlastic SA self-adhering roofing products, particular attention must be paid to storage and handling, deck preparation, slope and drainage, and application requirements to assure a successful installation and long-term performance.
 
For detailed installation instructions please refer to the CertainTeed Commercial Roof Systems Manual or click on the Installation Instructions link located on the right.

The CertainTeed low-slope Limited Product Warranty* fully explains how CertainTeed supports its products with the strongest warranty protection available.
 
*See actual warranty for specific details and limitations

 
Search CertainTeed.com
| Entire Site |