FlintCoat® -E




FlintCoat® -E

CertainTeed FlintCoat-E Emulsion Roof Coating is a UL Rated, fiber reinforced, professional grade product for coating built-up mineral surfaced, metal, concrete, corrugated and other roof surfaces and is great for use in polyester roofing systems. It can also be used for damp-proofing above or below grade foundation walls, and for sealing masonry surfaces and retaining walls as an anti-corrosive wood, metal, and pipe coating.

  • Odorless
  • Dries to a durable, flexible finish
  • Excellent adhesion over clean asphalt surfaces
  • Outstanding water and water vapor resistance
  • Adds to the service life of reflective coatings, when used as a primer

The following information represents typical average properties of FlintCoat-E:

  • Weight: 8.5 lbs. per gallon
  • Packaging: 5-gallon pail
  • Coverage: Approx 1/2 to 1 gallon per 100 square feet (two coats are recommended)
  • Color: Dark brown (uncured) - Black (cured)


For additional technical resources please refer to the CertainTeed Commercial Roof Systems Manual or click on the Technical Information link located on the left navigation area.
If CertainTeed FlintCoat -E Emulsion Roof Coating is used as a primer coating before application of another top coating, apply at a rate of 3 gallons per 100 sq. ft. If another top coating is not specified, use at the rate of 4 gallons per 100 sq. ft.

For best results, reinforce coating with a polyester reinforcing fabric or chopped glass fibers. Once cured, apply FlintCoat™ W. This will greatly extend the life of the roof. .

For detailed installation instructions please refer to the CertainTeed Commercial Roof Systems Manual or click on the Installation Instructions link located on the left navigation area.
Please refer to the document provided for all warranty information.

 
Search CertainTeed.com
| Entire Site |