ProRoc® Moisture Resistant Gypsum Board



 

view larger image

Gypsum board designed to provide moisture resistance

For use in interior applications where greater than normal moisture resistance is required. Commonly known as moisture resistant gypsum board, M-R board, or green board, ProRoc® Moisture Resistant Gypsum Board products are designed to provide better moisture resistance. All ProRoc® Moisture Resistant products are manufactured with a specially formulated moisture resistant core encased in water resistant 100% recycled paper. This combination provides an effective barrier to moisture penetration. The product is recognizable by its signature green face paper.

Also available in Type X for enhance fire resistance


Product Data:

Thickness: ½” (12.7mm), 5/8” (15.9mm)
Lengths: 8’ (2440mm), 9’ (2740mm), 10’ (3050mm), 12’ (3660mm)
Widths: 4’ (1220mm)
Edges: Tapered
Paper: 100% recycled moisture resistant green colored face paper with durable moisture resistant backing paper

For complete product description, please see Product Data and Submittal Sheet

 



Gypsum Board Brochure_Canada


Gypsum Board Brochure - US

ProRoc Moisture Gypsum Board has a moisture-resistant core enclosed in a 100% recycle moisture resistant green colored face paper and durable moisture resistant backing paper.


Applicable Standards: meets ASTM C 1396


For detailed Technical Data, please see Product Data and Submittal Sheet.

 

 


Moisture Resistant Product Data and Submittal Sheet

3-Part Spec - Gypsum Board

MSDS - Gypsum Board

Gypsum Board Systems Manual

ICC ESR-1338 Report

CertainTeed ProRoc® Regular Gypsum Board accepts most types of paints, texture and wall covering materials. The surface shall be primed and sealed with a full-bodied latex primer before applying a final decorative material. This will equalize the suction between the joint compounds and the paper surface. For best painting results, all surfaces, including joint compound, should be clean, dust-free and not glossy. If glossy paints are used, a thin skim coat of compound over the entire surface, Level 5 finish, is recommended to reduce highlighting or joint photographing. This method is also recommended for areas of critical sidelighting of natural or artificial light sources. A sealer application under wallpaper or other wall covering is also recommended so the board surface will not be damaged if the covering is subsequently removed during redecorating. Joint treatment must be thoroughly dry before proceeding with primer-sealer application and final decoration.


Consult the GA-600 Fire Resistance Design Manual or UL Fire Resistance Directory, Volume 1 for specific information regarding the construction of fire resistance rated assemblies.


For complete installation instructions, please see ProRoc Install Like the Pros, Gypsum Board Installation Guide


Install Like The Pros

UL Online Certifications Directory

GA-600 Fire Resistance Design Manual

Please see attached document for complete warranty
Gypsum Board Limited Warranty

CertainTeed is committed to resource conservation:
  • The face and back paper used for our gypsum board consists of 100% recycled paper.
  • Synthetic or “by-product” gypsum from the desulphurization of flue gases at coal-fired power plants is used where sources are available. Currently three manufacturing plants—Carrollton, Kentucky, Moundsville, West Virginia and Toronto, Ontario—use 100% synthetic gypsum. The total recycled content for these synthetic gypsum plants is 96%.
  • In-plant scrap is recycled back into the process. Our 14 gypsum board manufacturing locations provide regional material coverage throughout North America.
  • Although LEED rating systems do not currently address emissions for all building materials and their effects on indoor air quality, finished CertainTeed gypsum board products have no reportable VOCs and will not affect indoor air quality.


For complete information, please see the attached link
Gypsum Green Building Standards

 
Search CertainTeed.com
| Entire Site |  
 

We'd welcome your feedback!


You have been selected to participate in a brief survey to let us know how we can improve your experience. It will take less than 5 minutes to complete.


If you agree, a window will open behind all windows. The survey is designed to measure your entire experience, please look for it at the conclusion of your visit.


Take Our Survey Ask me later Don't ask me again