1" (25.4mm) M2Tech® Shaftliner Type X




Shaftwall and Area Separation Firewall Systems

M2Tech® Moisture and Mold Resistant Shaftliner Type X is a 1" thick and 2 ft wide gypsum shaftliner and coreboard with a fire resistive core enclosed in a moisture and mold resistant light violet paper for use in Shaftwall and Area Separation Firewall systems where enhanced mold resistance is preferred. M2Tech Shaftliner is available in avariety of lengths.

For detailed description, please see Product Data and Submittal Sheet.
 
Shaftwall Systems
  • One side construction eliminates the need for extensive scaffolding.
  • Rapid and ease of installation reduces overall construction time as well as providing a cost effective system
  • Light weight construction
  • Reduced wall thickness means greater floor area
  • Fire-resistance rating up to three hours

For detailed information, see brochure "M2Tech® Shaftliner for Gypsum Shaftwalls.”

 

 Area Separation Firewalls

  •  Economical and efficient installation
  • Eliminates the need for extensive scaffolding
  • Lighter weight construction
  • Reduced wall thickness means greater overall floor area
  • Fire-resistance rating up to two hours
  • Excellent sound attenuation qualities

For detailed information, see brochure “M2Tech® Shaftliner Type X for Area Separation Firewalls.”

M2Tech® Shaftliner is a1" thick gypsum board with a specially formulated fire resistive noncombustible core enclosed in a heavy moisture and mold resistant, light violet colored, 100% recycled paper for use in Shaftwall and Area Separation Firewall systems.

M2Tech Shaftliner gypsum board is designed and engineered for use in constructing lightweight Shaftwall and Area Separation Firewall assemblies. M2Tech Shaftliner gypsum board is UL Classified and ULC Listed in fire resistance designs and features double beveled edges for easy installation.
 
In addition to its fire resistive properties M2Tech Shaftliner gypsum board is also designed and engineered to provide added protection against mold when exposed to incidental or intermittent moisture during and after construction. When tested for mold resistance by an independent lab at the time of manufacturing, M2Tech Shaftliner achieved the highest possible score of 10 per ASTM D3273, “Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber."


For complete Technical Data, please see Product Data and Submittal Sheet

Applicable Standards and References

Shaftwall System

ASTM C1396, C475, C645, C754, C840, C1002, C1047, E84, E119;
CAN/ULC-S101, CAN/ULC-S102, CAN/CSA-A82.27, GA-600, GA-216, GA-238; UL U417, ULC W446; ICBO ES ER-3579; NER-506; ICBO ES ER-4924.

Area Separation Firewalls

ASTM C1396, C475, C645, C754, C840, C1002, C1047, E84, E119;
CAN/ULC-S101, CAN/ULC-S102, CAN/CSA-A82.27, GA-600, GA-216,
GA-238; UL U366, ULC W311.

Recommendations
 
Installation of M2Tech® Shaftliner Gypsum Boards should be
consistent with methods described in the standards and references noted.

Please see attached document for complete warranty.

CertainTeed is committed to resource conservation:

  • The face and back paper used for our gypsum board consists of 100% recycled paper.
  • Synthetic or “by-product” or DSG gypsum produced from the desulphurization of flue gases at coal-fired power plants is used where sources are available. Currently three manufacturing plants—Carrollton, Kentucky, Moundsville, West Virginia and Toronto, Ontario—use 100% synthetic gypsum.
  • The total recycled content for these synthetic gypsum plants is 96%.
  • In-plant scrap is recycled back into the process.; Our 14 gypsum board manufacturing locations provide regional material coverage throughout North America.
  • Although LEED rating systems do not currently address emissions for all building materials and their effects on indoor air quality, finished CertainTeed gypsum board products have no reportable VOCs and will not affect indoor air quality.

 
Search CertainTeed.com
| Entire Site |