Green Glue Noiseproofing Compound

Total noiseproofing solution:


Noiseproofing Compound

Green Glue Noiseproofing Compound is a viscoelastic damping compound that, when sandwiched between two layers of rigid material such as ProRoc® Gypsum Board, greatly reduces the amount of sound transmitted through walls or ceilings, and reduces the amount of noise generated from impacts on floors.  Green Glue can be quickly and easily applied between two sheets of any commonly used building materials in new construction and remodeling.  It can be used in walls, ceilings, and floors to drastically dampen sound vibrations.  By damping these vibrations, Green Glue is able to effectively eliminate up to 90 percent of noise transfer from one room or side of a structure to another. 

Noiseproofing Sealant

Gaps between soundproofed floors and walls can have a major impact on sound transfer from room to room. By applying Green Glue Noiseproofing Sealant, sound isolation can be improved by as much as 30dB, eliminating leaks and leading to significant noise reduction.

Noiseproofing Clips
The newest noiseproofing solution from Green Glue, these innovative clips provide resilient decoupling in new construction projects and have been shown to reduce noise transfer by more than 90 percent in certain new construction situations. Green Glue Noiseproofing Clips can also be used with Green Glue Noiseproofing Compound for even better results.

Noiseproofing Joist Tape
Green Glue Noiseproofing Joist Tape is a cost-effective and easily applied solution for squeaking floors and the noise transmission from foot impact caused from sub-flooring rubbing on joists.

For more product information, visit http://www.greengluecompany.com/

Green Glue Noiseproofing Compound

Green Glue Noiseproofing Compound is used between two or more sheets of commonly specified building materials such as drywall, plywood, OSB and poured gypsum flooring. One of the two laminated surfaces must be porous. Typical applications are for wall, floor and ceiling systems to significantly reduce unwanted sound transmission.


Product Data:
Active Content: 68% +/-5%
Working Time: 30 minutes
Viscosity: Light Paste 65,000 cps
Color: Green
Odor: Mild, none after drying
VOC: <2 g/l
Flash Point: >300 degrees F (149 C)
Application Temp: 40 to 90 degrees F (4 to 32 C)

For complete Technical Data, please see Product Data and Submittal Sheet.

Green Glue Noiseproofing Compound

Green Glue can be used to soundproof walls, floors and ceilings. Green Glue can be used both in new construction, building upgrades and renovations.

Since Green Glue is intended to be sandwiched between two sheets of building materials such as drywall, it eliminates the need to remove existing wall and floor materials.


Installing Green Glue is Fast!
- Use a standard quart size caulk gun
- Because of its thin consistency (like ketchup), you can easily dispense a tube of Green Glue in 15 seconds
- Green Glue will not flow off a board when installing.
- No specific coverage pattern is necessary to ensure excellent results.
- No measuring or troweling
- A larger tip opening (3/8” opening) can be used to speed application without concern for performance.


For complete installation instructions, please see the Green Glue Installation Guides.

Or visit www.greengluecompany.com/


Green Glue Noiseproofing Compound

CertainTeed Gypsum is committed to sustainability. Our manufacturing facilities, located throughout North America, provide regional material coverage and operate with a responsible and environmentally conscious ethic that includes reclamation, preservation of natural resources, recycling and waste management.

GreenGlue qualifies for LEED credit as it is a low-emitting adhesive and sealant that helps to reduce the quantity of indoor air contaminants that are odorous, irritating and or/hazardous.

 
Search CertainTeed.com
| Entire Site |