Plaster of Paris



 

fast-setting Plaster of Paris

Plaster of Paris is a top quality, quick setting plaster normally used in combination with gauged lime putty when a shorter set time is desired. It can also be used, mixed with lime putty, for forming plaster mouldings where required. Can be used in a variety of applications.

Fast-setting – allows adjustments to the set time
 
Plaster of Paris – 314475

 



Plaster of Paris Sell Sheet

Material: Plaster
Colour:   Off white
Packaging: 20 kg (44 lbs) bag
Coverage: Varies depending on application.
Shelf Life: 6 months from production code date when stored properly.
Storage: Rotate stock to avoid aging problems. Use within 60 days of delivery. Abnormal storage conditions (e.g., high humidity), aged product, and improper proportioning can adversely affect hardness and working properties of the material. Store in a dry location.


For complete Technical Data, please see Product Data and Submittal Sheet

 


Data Sheet - Plaster of Paris - English

MSDS - Setting Compounds


Finishing Full-line Brochure-West Canada


Finishing Full-line Brochure-East Canada

PREPARATION:
To shorten the set time of gauged plaster:
Pour approximately 30 liters of clean water into the centre of a ring formed from approximately 50 kg of lime putty. Slowly add the amount of Plaster of Paris that will give the desired setting time, along with the gauging plaster, into the water without allowing the plasters to come into contact with the lime putty. Add 1 part dry gauging plaster by volume to 3 parts lime putty by volume. After the dry plasters have soaked up the water, mix the plasters with the water and then thoroughly blend the plaster with the lime putty. Avoid scraping the gauging board while mixing.

To use for forming plaster mouldings: Use approximately 7 parts water to 10 parts plaster by weight. Sprinkle plaster into water and allow plaster to soak for 1/2 to 1 minute. Stir until uniform in consistency, then pour into mold.


Please see Install Like the Pros for complete installation instructions

Drywall Installation Guide

Install Like The Pros - Canada

Since methods and condition of application such as temperature, humidity and over thinning are beyond our control, CertainTeed Gypsum, Inc. (CertainTeed) will not be responsible for the failure of this product when not used according to directions and specifications and accepted standards of procedure inherent in drywall application; or when reasonable allowance is not made by the user for adverse weather and job conditions. However, if this product proves to be defective, maximum liability shall be limited to replacement of the material only or refund of the purchase price. This shall be the full limit whatsoever of CertainTeed’s liability. All claims shall be submitted in writing to CertainTeed within thirty days from the date of discovery. State or federal laws may provide rights in addition to this warranty that cannot be modified or excluded.
Finishing Limited Warranty

 
Search CertainTeed.com
| Entire Site |