ProRoc® Evenwall™ Gypsum Board



 

 

For interior walls and ceilings in standard residential or commercial applications

ProRoc® Evenwall™ Gypsum Board is an interior gypsum board consisting of a solid set, fire-resistive gypsum core enclosed in ivory-colored face paper and liner back paper. Long edges are rounded and tapered, allowing joints to be reinforced and concealed with joint tape and joint compound. ProRoc Evenwall Gypsum Board is available in a variety of lengths. Also available in Type X for enhance fire resistance.


Product Data:
ASTM C 1396
Thickness: 1/2” (12.7 mm), 5/8” (15.9 mm)
Lengths: 8’ (2440 mm), 10’ (3050 mm), 12’ (3660 mm), 14’ (4270 mm), 16’ (4880 mm)
Widths: 4’ (1220 mm) standard – 8’, 10’ and 12’ Lengths; 54” (1370 mm) – 12’, 14’, 16’ Lengths
Edge: Evenwall™
Paper: 100% recycled Ivory colored face paper and strong liner back paper.
Weight: 5/8” (15.9 mm): 2.3 lb/ft2 (11.23 kg/m2)
Packaging: Two pieces per bundle; face-to-face and end-taped.

 For complete product description, please see Product Data and Submittal Sheet

 

 



Gypsum Board Brochure - US


Gypsum Board Brochure_Canada

Special widths, lengths or edges may be available on special order. Consult your CertainTeed sales representative.
Core: Gypsum (non-combustible) premium quality natural (mined) gypsum, recycled gypsum and DSG (from flue gas desulphurisation, FGD) are used to manufacture ProRoc® Gypsum Board Products
Applicable Standards: meets ASTM C 1396
Surface Burning Characteristics: CertainTeed ProRoc® Evenwall™ Type X Gypsum Board has a Flame Spread rating of 15 and Smoke Developed rating of 0, in accordance with ASTM E 84, (UL 723, NFPA 255, CAN/ULC-S102). “UL Classified for Fire Resistance (ANSI/UL 263; ASTM E 119) and listed under UL File No. CKNX.R3660”
 
Consult the GA-600 Fire Resistance Design Manual or UL Fire Resistance Directory, Volume 1 for specific information regarding the construction of fire resistance rated assemblies.”

 For complete Technical Data, please see Product Data and Submittal Sheet.

 See important Fire Safety Information.


Important Fire Safety Information

Data and Submittal Sheet - Type X

3-Part Spec - Gypsum Board

MSDS - Gypsum Board

Gypsum Board Systems Manual

ICC ESR-1338 Report

CertainTeed ProRoc® Regular Gypsum Board accepts most types of paints, texture and wall covering materials. The surface shall be primed and sealed with a full-bodied latex primer before applying a final decorative material. This will equalize the suction between the joint compounds and the paper surface. For best painting results, all surfaces, including joint compound, should be clean, dust-free and not glossy. If glossy paints are used, a thin skim coat of compound over the entire surface, Level 5 finish, is recommended to reduce highlighting or joint photographing. This method is also recommended for areas of critical sidelighting of natural or artificial light sources. A sealer application under wallpaper or other wall covering is also recommended so the board surface will not be damaged if the covering is subsequently removed during redecorating. Joint treatment must be thoroughly dry before proceeding with primer-sealer application and final decoration.

Applicable Standards and References:
  • ASTM C 840
  • GA-216
  • GA-214

For complete installation instructions, please see ProRoc Install Like the Pros

Install Like The Pros

UL Online Certifications Directory

GA-600 Fire Resistance Design Manual

Please see attached document for complete warranty
Gypsum Board Limited Warranty

CertainTeed is committed to resource conservation:
  • The face and back paper used for our gypsum board consists of 100% recycled paper.
  • Synthetic or “by-product” gypsum from the desulphurization of flue gases at coal-fired power plants is used where sources are available. Currently three manufacturing plants—Carrollton, Kentucky, Moundsville, West Virginia and Toronto, Ontario—use 100% synthetic gypsum. The total recycled content for these synthetic gypsum plants is 96%.
  • In-plant scrap is recycled back into the process. Our 14 gypsum board manufacturing locations provide regional material coverage throughout North America.
  • Although LEED rating systems do not currently address emissions for all building materials and their effects on indoor air quality, finished CertainTeed gypsum board products have no reportable VOCs and will not affect indoor air quality.


For complete information, please see the attached link
Gypsum Green Building Standards

 
Search CertainTeed.com
| Entire Site |  
 

We'd welcome your feedback!


You have been selected to participate in a brief survey to let us know how we can improve your experience. It will take less than 5 minutes to complete.


If you agree, a window will open behind all windows. The survey is designed to measure your entire experience, please look for it at the conclusion of your visit.


Take Our Survey Ask me later Don't ask me again