CertainTeed Vapor Prime is a vapor retarder coating designed for use on interior wallboard surfaces. Vapor Prime is a non-breathing latex primer sealer applied in a production spray application which seals the wall with a perm rating of less than 1.0 in one coat. Vapor Prime is a low VOC product formulated to replace conventional vapor barrier methods such as plastics and paperfaced insulation.
- Color: White Finish: Flat
- Packaging: 5 US Gal. (18.9 L) pail Coverage:
- Coverage is 200 square feet per gallon when applied at 8 wet mils. Coverage rates will vary with mil thickness, applicator technique and type of spray tip (amount of fallout).
- Recommended Mil Rate: Apply a minimum of 8 wet mils to achieve a less than 1 perm rating. Dry time is 2 – 4 hours dependent on temperature and humidity.
- Shelf life: One year when properly stored and sealed.
- Storage: Store materials in a dry area. Protect materials from direct sunlight. Do not stack more than two pallets high. Store materials at a temperature between 40°F – 90°F (4°C – 33°C). Do not freeze, product will not recover.
- Apply with 1/4", 3/8" or 1/2" roller. The smaller the nap the less the stipple. Roll out to desired stipple which is approximately 6 mils wet. Allow to dry. Light sanding with 150 – 220 grit is optional.
- Apply Vapor Prime with an airless sprayer that sprays at least 1/2 gallon per minute, pump pressure rated at 2700 – 3000 psi and spray tip orifice between 0.023 and 0.031. Light sanding is option with 150 – 220 grit to smooth fall out or imperfections. Respirator and eye wear not required but recommended. Clean tools, equipment with soapy water and rinse.
Since methods and condition of application such as temperature, humidity and over thinning are beyond our control, CertainTeed Gypsum, Inc. (CertainTeed) will not be responsible for the failure of this product when not used according to directions and specifications and accepted standards of procedure inherent in drywall application; or when reasonable allowance is not made by the user for adverse weather and job conditions. However, if this product proves to be defective, maximum liability shall be limited to replacement of the material only or refund of the purchase price. This shall be the full limit whatsoever of CertainTeed's liability. All claims shall be submitted in writing to CertainTeed within thirty days from the date of discovery. State/Provincial or Federal laws may provide rights in addition to this warranty that cannot be modified or excluded.
CertainTeed Gypsum is committed to sustainability. Our manufacturing facilities, located throughout North America, provide regional material coverage and operate with a responsible and environmentally conscious ethic that includes reclamation, preservation of natural resources, recycling and waste management. We are continually looking for ways to reduce our impact on the environment while meeting customer demand for sustainable products that deliver comfort, protection and performance.
For more information, please see our Sustainability Brochure.