Quiet Work Spaces
Unfaced, light density, 1-1/2" (38mm) thick fiber glass batts for use in steel stud construction. Sized for friction-fit installation.
To enhance acoustical and thermal performance in shaft and low-profile partition walls.
- Enhances acoustical and thermal performance properties.
- Will not rot or mildew; resists fungal growth.
- Lightweight; easily fabricated and installed.
- Rated noncombustible per ASTM E136.
These insulation products may qualify for rebates and other incentives. For more information, visit certainteed.com/itools for your area's specific offers.
Help build an environment of change.™ - Sustainable Insulation
Get Inspired and Learn More
- ASTM C553, Types I, II
- ASTM C665, Type I
- ICC Model Building Codes
- California Quality Standards, Reg. No. CA-T024 (PA)
CertaPro Partition Batts are designed to fill the entire stud cavity and be held in place by friction-fit until the interior finish is applied. For applications where the wall is not finished on both sides or the insulation does not fill the cavity, supplementary support of the insulation, such as wire or insulation pins, shall be provided to hold the insulation in place.
These installation recommendations are general in nature. Other methods are acceptable. Please consult local building codes for recommendations best suited to the application.
Please refer to CertaPro™ Commercial Limited One-Year Fiber Glass Insulation Warranty.
In as much as CertainTeed has no control over the installation design, installation workmanship, accessory materials, or conditions of application, CertainTeed does not warrant the performance or results of any installation containing its products.
CertainTeed insulation products improve building energy efficiency and reduce building energy consumption for the life of the structure. As a result, they help conserve nonrenewable energy sources, decrease dependence on foreign oil and lower greenhouse gas emissions. In addition, the recycled content of CertainTeed fiber glass insulation meets the EPA minimum Recovered Material Guideline for fiber glass products consisting of preconsumer and post-consumer glass cullet.
CertainTeed Sustainable Insulation is GREENGUARD Gold Certified for low chemical emissions into indoor air during product usage.