CertainTeed Accessory Products
From start to finish...CertainTeed Hip & Ridge and Starter Accessories are designed to work with CertainTeed shingles to give your roof a professional finished look. Ask your Contractor about the following accessory products for your CertainTeed shingle installation:
Hip and Ridge Shingles
Starter Shingles
Hip & Ridge Accessory Products
|
Symphony™ Hip and Ridge Accessory Shingles are designed specifically for use with Symphony™ shingles and are used to finish the hips and ridges of your roof.
- 8" exposure
- Covers 10 lineal feet per box (15 shingles/box)
- Available in steep-slope and medium slope
|
|
|
Shangle Ridge® Accessory Hip and Ridge Accessory Shingles are designed specifically for use with Grand Manor™, Centennial Slate™ and Carriage House™ shingles and are used to finish the hips and ridges of your roof.
- Two full layers
- 12" x 18", with 8" exposure
- Covers 10 lineal feet per box
- Algae resistant
- Matches all Grand Manor, Centennial Slate and Carriage House colors
- Pre-cut for easy installation, with a centering notch for a no-miss side-to-side alignment
|
Shangle Ridge
|
|
Presidential Accessory Hip and Ridge Accessory Shingles are designed specifically for use with Presidential Shake™ and Presidential Shake™ TL shingles and are used to finish the hips and ridges of your roof.
- Easy to separate into three individual pieces by folding along pre-cut lines
- Designed to match the dimensionality and depth of shingles
- Available in colors to coordinate with shingles
- English - 12" x 36", with 5" exposure; covers 30" lineal feet per bundle
- Metric - 13 1/4" x 39 3/8", with 5-5/8" exposure; covers 45 linear feet
- Also available in an impact resistant version for use with Presidential Shake Impact Resistant shingles
|
Presidential Accessory
|
|
Hatteras® Accessory Hip and Ridge Accessory Shingles are designed specifically for use with Hatteras shingles and are used to finish the hips and ridges of your roof.
-
Matches all Hatteras colors
-
Algae Resistant
-
12" x 18", with 8" exposure
-
Covers 36 lineal feet per bundle
-
Pre-scored for easier installation
|
Hatteras Accessory
|
|
Hallmark® Accessory Hip and Ridge Accessory Shingles are designed specifically for use with Hallmark shingles and are used to finish the hips and ridges of your roof.
|
|
|
Shadow Ridge™ Hip and Ridge Accessory Shingles are designed specifically for use with Landmark™ TL, Landmark Series, Woodscape® Series, Independence™, Classic Horizon™ New Horizon® and Patriot™ shingles and are used to finish the hips and ridges of your roof.
-
Easy to separate into individual pieces by folding along pre-cut lines
-
Can be doubled - coursed to accent rooflines and enhance overall appearance
-
Size and color availability can vary by region
- English - 12" x 36", with 5" exposure; covers 30 lineal feet per bundle
-
Metric - 13-1/4" x 39-3/8", with a 5-5/8" exposure: covers 33 lineal feet per bundle
|
Shadow Ridge
|
Starter Shingle Products
High-Performance Starter
Starter course shingle specifically for use with Grand Manor, Centennial Slate and Hatteras shingles - and the only approved installation alternative to using the shingles themselves.
- "Hatteras" dual-sealant strips at bottom edge for 110 mph wind resistance
- Installation is a snap - no need to cut tabs off expensive shingles
- Provides a straight factory-cut eave edge for a clean look
- Required for Hatteras wind warranty coverage
- 10" x 36" starter strip
- 34 pieces (102 linear feet) per bundle
Presidential Starter
Required for Presidential Shake TL and Presidential Shake applications
- Assures Class A fire rating
- Two layers of straight factory-cut eave edge
- Available in the entire Presidential TL and Presidential Shake color line
- Also available in an impact resistant version for use with Presidential Shake Impact Resistant shingles
- 13-1/4" x 40", 22 pieces (36 linear feet of double-layer coverage) per bundle
Universal Starter
Pre-cut starter course shingles.
- Available in 7" widths
- 7" x 36", 34 shingles per bundle
- 102 linear feet per bundle
CertainTeed Starter - Metric
Pre-cut starter for use under metric sized shingles (13-1/4" x 38-3/4")
- 10" x 38-3/4", 25 shingles per bundle
- 80 linear feet per bundle